Factory Price For I2c Humidity And Temperature Sensor - HENGKO SD123-T10 waterproof Temperature and Humidity Transmitter 485modbus for environmental measurement – HENGKO
Factory Price For I2c Humidity And Temperature Sensor - HENGKO SD123-T10 waterproof Temperature and Humidity Transmitter 485modbus for environmental measurement – HENGKO Detail:
HENGKO analog temperature and humidity module adopt high precision RHT series sensor equipped with a sintered metal filter shell for large air permeability, fast gas humidity flow and exchange rate. The shell is waterproof and will keep water from seeping into the body of the sensor and damaging it, but allows air to pass through so that it can measure the humidity (moisture) of the environment. It has been widely used in HVAC, consumer goods, weather stations, test & measurement, automation, medical, humidifiers, especially perform well in an extreme environment like acid, alkali, corrosion, high temperature and pressure.
Power Supply: DC9V~DC30V(Recommend the DC12V)
Measuring range: -20~70℃; 0~100%rh
Accuracy of measurement: ±0.3℃; ±3%RH
Resolution: 0.1℃; 0.1rh
Connector Type: RS485
Protocol: MODBUS-RTU
Correspondence Address: 1-247
Baud rate: 1200bit/s，2400bit/s，4800bit/s，9600bit/s，19200bit/s
Size: 65*46*29mm
Installation: Track installation, indoor wall installation, ceiling installation
Want more information or would like to receive a quote?
Click the Online Service at the top right to contact our salespeople.
E-mail: ka@hengko.com sales@hengko.com f@hengko.com h@hengko.com
RS485 Humidity Sensor For Baking Ovens, High-temperature Dryers
Product Show
| Model | Humidity Accuracy(%RH) |
Temperature (℃) | Voltage Supply(V) |
Interface | Relative Humidity Range(RH) |
| RHT-20 | ±3.0 @ 20-80% RH |
±0.5 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-21 | ±2.0 @ 20-80% RH |
±0.3 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-25 | ±1.8 @ 10-90% RH |
±0.2 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-30 | ±2.0 @ 10-90% RH |
±0.2 @ 0-65 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
| RHT-31 | ±2.0 @ 0-100% RH |
±0.2 @ 0-90 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
| RHT-35 | ±1.5 @ 0-80% RH |
±0.1 @ 20-60 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
| RHT-40 | ±1.8 @ 0-100% RH |
±0.2 @ 0-65 ℃ |
1.08 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-85 | ±1.5 @ 0-100% RH |
±0.1 @20 to 50 °C |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
Can't find a product that meets your needs? Contact our sales staff for OEM/ODM customization services!
Product detail pictures:
Related Product Guide:
Good quality comes to start with; service is foremost; organization is cooperation" is our enterprise philosophy which is regularly observed and pursued by our firm for Factory Price For I2c Humidity And Temperature Sensor - HENGKO SD123-T10 waterproof Temperature and Humidity Transmitter 485modbus for environmental measurement – HENGKO, The product will supply to all over the world, such as: Stuttgart , Croatia , Washington , Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Dale
from Eindhoven
- 2015.12.14 15:26
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Andrea
from Botswana
- 2015.02.08 16:45
