Aeration Stone - SFB02 Stainless Steel Micron Diffusion Stone – HENGKO

HENGKO SFB02 stainless steel diffusion stone is widely used to  diffuse oxygen into your beer keg for fermentation.Made of high-quality 316L stainless steel, the stainless steel diffusion stone has the characteristics of practicality, health, corrosion resistance, high temperature resistance and durability. 2 micron diffusion stone produces smaller & finer bubbles which can make the gas combines with liquid faster. Make draft beer, home brew soda and other drinks more delicate, more exquisite and more fresh.It is the best choice for beer, soda or coffee oxygenation and carbonation.

Small bubbles
All-metal construction
Easy-to-install
Customized
Small bubbles

Small bubbles transfer gases faster, more efficiently.

HENGKO diffusion stone introduce gases into liquids through thousands of tiny pores, creating bubbles far smaller andmore numerous than with drilled pipe and other spargingmethods. The result is greater gas/liquid contact area, which reduces the time and volume required to dissolve gas into liquid.
With thousands of pores over the surface, large volumes of gas can be passed with very high specific area. For example, with equal volumes of gas, 1mm bubbles would have 6.35 times more gas/liquid contact surface area than 6.35mm (1/4") bubbles.

All-metal construction

All-metal construction lasts for years.

HENGKO carbonation stone are constructed entirely of metal, to provide long-lasting operation even in the midst of temperatures as high as 1450°F under oxidizing conditions. And for inert and corrosive media.

Easy-to-install

Simple, cost-effective, easy-to-install.

HENGKO carbonation stone typically consist of a porous metal element.The design is simple, without moving parts. Installation is easy, and requires no special tools. From single elements to manifolded systems, HENGKO carbonation stone are among the simplest, most affordable and most efficient gas/liquid contacting solutions available anywhere.

Customized

All sizes and configurations.

HENGKO carbonation stone are designed, manufactured and finishedat HENGKO. So if you need a non-standard size, or a special fitting, HENGKO has the capability to accommodate your
request.

How To Use This Aeration Stone On Keg Lid ?

1. You need a couple of feet of 1/4" hose

2. Attach the hose's end to the end of the dip tube inside of the keg lid, and the other end to the stone

3.Make sure you attach hose clamps to both connections,set your regulator to about 2 psi, and the gas will be forced through the millions of tiny pores in the stone

4.The bubbles rise through the beer creating so much surface area contact between gas and liquid that the absorption rate is very rapid.Carbonate your beer overnight

0.5 2 Diffusion Stone Micron Stainless Steel
Aeration Stone Carbonating Diffusion
Stone with 1/4 1/8 Inch Barb for
aeration & carbonation

Can't find a product that meets your needs? Contact our sales staff for OEM/ODM customization services!