2022 Latest Design Dew Point Probe - HENGKO SD123-T10 waterproof Temperature and Humidity Transmitter 485modbus for environmental measurement – HENGKO
2022 Latest Design Dew Point Probe - HENGKO SD123-T10 waterproof Temperature and Humidity Transmitter 485modbus for environmental measurement – HENGKO Detail:
HENGKO analog temperature and humidity module adopt high precision RHT series sensor equipped with a sintered metal filter shell for large air permeability, fast gas humidity flow and exchange rate. The shell is waterproof and will keep water from seeping into the body of the sensor and damaging it, but allows air to pass through so that it can measure the humidity (moisture) of the environment. It has been widely used in HVAC, consumer goods, weather stations, test & measurement, automation, medical, humidifiers, especially perform well in an extreme environment like acid, alkali, corrosion, high temperature and pressure.
Power Supply: DC9V~DC30V(Recommend the DC12V)
Measuring range: -20~70℃; 0~100%rh
Accuracy of measurement: ±0.3℃; ±3%RH
Resolution: 0.1℃; 0.1rh
Connector Type: RS485
Protocol: MODBUS-RTU
Correspondence Address: 1-247
Baud rate: 1200bit/s,2400bit/s,4800bit/s,9600bit/s,19200bit/s
Size: 65*46*29mm
Installation: Track installation, indoor wall installation, ceiling installation
Want more information or would like to receive a quote?
Click the Online Service at the top right to contact our salespeople.
E-mail: ka@hengko.com sales@hengko.com f@hengko.com h@hengko.com
RS485 Humidity Sensor For Baking Ovens, High-temperature Dryers
Product Show
Model | Humidity Accuracy(%RH) |
Temperature (℃) | Voltage Supply(V) |
Interface | Relative Humidity Range(RH) |
RHT-20 | ±3.0 @ 20-80% RH |
±0.5 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
RHT-21 | ±2.0 @ 20-80% RH |
±0.3 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
RHT-25 | ±1.8 @ 10-90% RH |
±0.2 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
RHT-30 | ±2.0 @ 10-90% RH |
±0.2 @ 0-65 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
RHT-31 | ±2.0 @ 0-100% RH |
±0.2 @ 0-90 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
RHT-35 | ±1.5 @ 0-80% RH |
±0.1 @ 20-60 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
RHT-40 | ±1.8 @ 0-100% RH |
±0.2 @ 0-65 ℃ |
1.08 to 3.6 | I2C | -40 to 125 ℃ |
RHT-85 | ±1.5 @ 0-100% RH |
±0.1 @20 to 50 °C |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
Can't find a product that meets your needs? Contact our sales staff for OEM/ODM customization services!
Product detail pictures:

Related Product Guide:
We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for 2022 Latest Design Dew Point Probe - HENGKO SD123-T10 waterproof Temperature and Humidity Transmitter 485modbus for environmental measurement – HENGKO, The product will supply to all over the world, such as: Plymouth , Plymouth , Spain , Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
